Hello! Today, I'm going to show you how to make a owl pillow. This cute DIY no sew owl pillow is easy to make and its makes a cute winter DIY room decoration idea.
I have made another version of this DIY no sew pillow with a different design. Here's the link to that video the first DIY owl pillow: https://youtu.be/HQmWhQOLsbg
Let's get started!
Here's the video version of this DIY!
What you will need for this DIY are threee or more colors of fabric, scissors, paper, pencil, a glue gun, ribbon, and something you might need is tape.
The first thing you have to do is draw out a template of a owl onto a piece of paper. I did draw half of the owl so I could draw a bigger owl on the paper.
Draw a border around the owl because that's where the glue will go. Then cut it out.
Now you can trace the template onto the fabric you are going to use for the body of the owl. I traced the one side of the owl and then I flipped the template onto the other side and traced it again. There should be a full owl now.
Then the owl can be cut out and then the owl that was cut out can be traced. So there can be two owl shapes.
If the owls are not the same size put them on top of each other and trim the bigger owl to match the other owl shape.
Now put the back and front side of the fabric on top of each other and lift up the top owl and glue on the edges of the owl that's on the bottom and let go of the owl your holding. Press down on the top owl to make sure the owls are stuck together. Do this all the way around the owl and make sure you leave a hole.
When the glue drys flip the owl inside out through the hole.
Then you can stuff the pillow and glue the opening shut by folding the fabric, putting glue on the fabric where the opening is and pressing the opening together until the glue drys.
Grab your template that you used the the owl's body and draw out where the wings will go and cut the wing out of the template.
Take a circular object and trace around onto the same fabric as the wings or another color. Then cut out two circles.
Then trace one of the circles onto white fabric and then make a slightly smaller circle inside of that circle and cut the smaller circle out. I traced the big circle that I used for the eye because I needed a smaller white circle for the white part of the eye.
Then I traced the smaller circle and I cut the another circle out.
If your white fabric is thin and if you can see the color underneath then cut out four circles instead of two circles so the color doesn't show through.
Then glue the white circles together. You should have two white circles and not four.
Then you can glue the white circles onto the circle that goes underneath the white circles.
You should be able to see the border of the other fabric around the white fabric.
Trace around a smaller circle than the white circles onto black fabric and cut out two small circles. This will be for the pupils.
Now you can glue the eyes onto the center of the white circles or off center to make it look like the owl is looking the other way.
Draw out a diamond shape for the beak with black fabric or another color and cut it out.
The last thing you can make is that you can make a bow out of ribbon.
Then layout the wings, the eyes, the beak, and the bow onto the owl and glue it all on to the owl.
Final Thoughts
and that's it! I love how cute this owl looks! It works perfectly as a winter decoration pillow. In the comments down below let me know what you think about this owl pillow DIY.
Hey, whats up you guys? My name is Emily and in this video I'm going to show you how to make a spider web frame. This is a easy Halloween decor idea that can be done under ten minutes.
Lets get started!
What you will need for this DIY is the front part of a frame of any size, shape, or color, you don't need the back or the glass of the frame, white string, scissors, tape, spiders, and a glue gun.
First, I taped one end of the string onto the back of the frame. The tape helps the string stay in place while wrapping the string around the frame.
Then tightly wrap the string to the other side of the frame and tape the string again on the back of the frame.
Repeat these steps until you like how the web looks on the frame and you can wrap the string in many different directions.
When you get to the end of the string or if you like how to web looks, cut off the extra string and tape the end of the string to the back of the frame.
Flip the frame over and glue the spiders onto the frame or on the string where the strings cross over each other. The spiders won't move as much on where the strings cross over each other.
You can flip the frame over, add a drop of glue behind the spiders and top of the string to make sure they don't fall of the string.
and that's it! In the comments down below let me know what you think about this DIY.
Hello! Today, I'm going to show you how to make a fox pumpkin. This cute DIY fox pumpkin is a perfect idea for fall. This DIY fall room decor idea can be a centerpiece of a table. This is a very easy DIY no carve pumpkin idea.
Lets get started!
Draw out a face, a tail, and ears on cardstock paper. Draw some extra room on the ears so they can be glued on easier onto the pumpkin.
Then cut all of the pieces out with scissors.
Then paint the face, and the edges of the ears black and the tail orange.
When the face and the tail are dry glue them on.
Before you glue on the ears fold the bottom part of each ear.
Then you can glue on the ears.
The last thing you have to do is paint the back of the ears black.
and that's it! In the comments down below let me know what you think about this fox pumpkin DIY.
Hello! Today, I'm going to show you my top five favorite outfits and ways to wear a leather jacket. Let me know in the comments your favorite look.
Look # 1
Faux Leather Jacket
Forever 21
Black Mossimo T-shirt
Target
Black Jeans
Hot Topic
Black Mossimo Shoes
Target
Look # 2
Faux Leather Jacket & White T-shirt
Forever 21
Panda Necklace
Hot Topic
Shoes
Forever 21
Look # 3
Faux Leather Jacket
Forever 21
Black Veil Brides T-shirt
I got it at a concert.
Jeans
Hot Topic
Black Mossimo Shoes
Target
Look # 4
Faux Leather Jacket & T-shirt
Forever 21
Black Jeans
Hot Topic
Black Mossimo Shoes
Target
Look # 5
Plaid Shirt & Faux Leather Jacket
Forever 21
Black Mossimo T-shirt
Target
Black Jeans
Hot Topic
Black Mossimo Shoes
Target
Target
Black Jeans
Hot Topic
Black Mossimo Shoes
Target
Let's get started!
1 DIY Ghost Trick or Treat Bucket
What you will need is a ice cream bucket or any type of bucket with a handle will work, cardstock paper, scissors, a pencil, and tape or glue.
Draw and cut out the eyes and the mouth of a ghost out of cardstock paper. Make sure the eyes and the mouth fit on the side of the bucket before putting them on the bucket.
Then tape or glue the mouth and eyes on the bucket. If there is a sticker on the bucket you can tear it off.
2 DIY Spider Web Life Hack
All you have to do is spread out the pillow stuffing very thin by pulling it but not completely pulling it apart. Then place it carefully onto your objects.
3 DIY Paper Roll Candle
For this DIY, I'll show you how to make this white bloody candle out of a fake candle, glue gun, and a paper roll. I think this is a lot more easier and faster than waiting for candle wax to drip onto a real candle.
All you will need is a paper roll, white and red paint or whatever color you want, a fake candle, paper, a paintbrush, and a glue gun.
Paint the paper roll white and wait to dry.
When dry take the glue gun and start from the top and make lines of glue all the way around the paper roll. Make some of the lines of glue longer than the others and some of them shorter.
When the glue drys, paint the glue red.
When the paint is dry, crumple up a piece of paper and put it inside of the paper roll through the bottom. Make sure the paper doesn't go through the top of the paper roll.
Then place the fake candle at the top. The light of the fake candle should be only thing seen on the top of the paper roll.
4 DIY Costume Life Hack
5 DIY Spider Ice
For this party hack, you will need fake spiders, water, a freezer, and ice cube trays.
Put some spiders into the ice cube tray and put water in with the spiders. Then freeze the tray in the freezer for a couple of hours or overnight.
Then you can take them out when frozen and put them into any drink. It will look a lot cooler in clear drinks like water.
6 DIY Bag Lights
For this DIY, you can take a colored or white bag, glue a face onto it, and put a fake candle inside multiple bags and make a light trail on your sidewalk.
7 Pumpkin Life Hack
For this next life hack, you can buy fake pumpkins, design them any way you want, and keep them every year and save money from not buying real ones.
8 DIY Bat Garland
To make this cute bat garland, you will need cardstock paper, bat template, a pencil, scissors, string, and tape.
Trace the bat template onto a piece of cardstock paper and cut out as many bats as you want on the string.
Then tape the bats onto the string in different angles and hang it up on the wall.
9 DIY Pumpkin Light
Draw a pumpkin face or another face onto the paper roll and then take the x-acto knife and cut out holes where the lines are.
Then you can paint the paper roll any color you want. Then put a fake candle under the paper roll.
10 DIY Treat Jar
This last DIY can be used for a party. It is a treat jar and you will need a jar, floral accents, ribbon, scissors, and candy.
Put the floral accents at the bottom of the jar and put the candy on top. Then tie a bow onto the jar with the ribbon and cut off the extra ribbon. The last thing you have to do is put the lid onto the jar.
and that's it!
Hello! Today, I'm going to show you how to make a polka dot jar that's perfect for Halloween or fall. This DIY polka dot for Halloween or fall can be a cute on a shelf or a as a centerpiece.
Lets get started!
Paint your jar two coats of paint.
When it's dry, paint on the polka dots onto the jar with a different color of paint. If you want you can paint the dots in different sizes.
When its dry, tie a bow on to the jar with ribbon or twine.
Paint the band of the mason jar the same color as the polka dots.
When the band is dry, put it onto the jar.
Then you can put the flowers into the jar.
and that's it! In the comments down below let me know what you think about this DIY.
Hello! Today, I'm going to show you one fall and one Halloween wall decoration. They are really easy to make.
For the first DIY, I will show you how to make a leaf wall mobile for fall. For the last DIY, I'll show you how to make a sewing hoop wreath for Halloween.
Let's get started!
DIY Leaf Mobile
For the first DIY, I will show you how to make this fall leaf wall decoration.
What you will need for this DIY is a stick, string, fake leaves, scissors, and tape.
Take a piece of string and tie it on both sides of the stick. You should get something like this.
Then tie three or more strings to the stick.
Lay out where you want the leaves to be and cut off the the extra string where the leaves will go. You can make the string any length you want. I decided to put one leaf on each string and make each string longer than the string before it.
Then tape the leaves onto each string and hang it onto the wall or wherever you want.
DIY Sewing Hoop Wreath
For the last DIY, I'll show you how to make this Halloween sewing hoop wreath.
What you will need for this DIY is flowers, a sewing hoop, ribbon, scissors, and a glue gun.
Pull the flowers off the stems and lay them out on the sewing hoop to see how you want it to look like before you glue it on. You can add as many flowers you would like.
Glue on the flowers to the sewing hoop. If you have a metal part on the sewing hoop cover it up with the flowers.
Tie a loop at the top of the sewing hoop with the ribbon so you can hang it up.
and that's it!
I love these DIY's! In the comments down let me know what you think about these DIY's.
Unicorn Silhouette Jar
You will need a Jar, paint, paintbrush, masking tape, a pencil, twine, flowers, candle, and rocks
Get two pieces of tape and overlap them to make a bigger piece of tape.
Draw out a silhouette of a unicorn on the tape and cut it out with a x-acto knife or scissors.
Place the unicorn silhouette on the front of jar.
You can now start painting the jar.
When the jar is dry, you can take of the tape off the jar.
Tie a bow with the twine on to the jar and then place the candle, rocks, or flowers inside the jar.
Unicorn Silhouette Pillow
You can either sew this pillow or you can glue it
You will need fabric, scissors, pencil, pillow stuffing, glue gun, paint, a paintbrush, and a ruler.
Use your ruler and a pencil to cut out one rectangle.
Fold the fabric in half and then cut out another squares.
Draw or trace the unicorn silhouette on to the fabric.
Now you can paint in the design and wait to dry.
Place the front sides of the fabric on top of each other.
Use the glue gun and glue around the corners of the fabric and then place the other fabric square on top. Make sure you leave a hole.
Flip it inside out through the hole that you left open. Then you can stuff the pillow.
Glue the opening together.
Unicorn Frame Art
You will need a picture frame, cardstock, paint, printer, paintbrush, pencil, scissors, and Mod Podge.
Print out the design or draw out the design.
Trace the back of the frame around the design.
Cut out the design.
Paint the unicorn silhouette with Mod Podge and pour the glitter onto the unicorn or wherever you would like the design and wait to dry.
Place the design inside the frame and put the frame together.
Final Thoughts!
and that's it! All of these DIY's are for someone that loves unicorns. If you could be a unicorn what color would you be?
Subscribe to:
Posts (Atom)
Social Icons